Bosch Software Packages

Diagnostics for passenger vehicles, HGVs, Buses, Commercial Vehicles and Motorbikes

Discover which package suits your workshop enviroment

Automotive Technician
Training Courses

Training coures from entry level right through to Master Technician

  • TFT monitor, foot pedal brake, middle centering flange with mechanical quick clamping nut and pneumatic quick-clamping, electronic feeler arm, laser measuring system, wheel lift

Bosch WBE 4515

Mfr# 1694100089

Category: Tyre Service Equipment

TFT monitor, foot pedal brake, middle centering flange with mechanical quick clamping nut and pneumatic quick-clamping, electronic feeler arm, laser measuring system, wheel lift

£8595.00

ex VAT

£10314.00

inc VAT

buy WBE 4515 now
Technical data WBE 4515
Rim diameter 10" - 26"
Rim width 1" - 20"
Max. wheel diameter 1,050 mm
Maximum wheel weight 70 kg
Balancing speed (60Hz / 50Hz) 190 rpm
Pneumatic air pressure 8 - 12 bar
Weight 355 kg
W x H x D in mm 2,030 x 1,980 x 976

Highlights:

  • Balancing of passenger car and transporter wheels. Motorcycle wheels also possible with optional accessories
  • Measurements with the laser measuring system: Rim width, true running and tire conicity measurement
  • Suggestion for optimum assembly position of the wheel on the vehicle
  • Printout of measurement results for customer discussions (printer set available as special accessory)

WBE 4515: Top machine in the latest generation – fast, precise, comfortable

The WBE 4515 sets new standards in operator convenience and speediness. Even heavy SUV wheels can be lifted with no problem by the wheel lift – thanks to the clamping option, wheels up to 70 kg can be raised effortlessly and safely. The pneumatic flange then clamps the wheel exactly. After scanning of the wheelbase and pneumatic closing of the wheel cover, the measurement can be started. The laser sensor measures the wheel width, true running and wheel symmetry fully automatically and the balance is also recorded. After the measurement, the wheel is braked in the correct position for installation of the weight. When balancing is complete, the wheel lift is moved over to the wheel, the pneumatic flange is opened and the wheel is lowered safely to the ground. With the WBE 4515, you are equipped for all occasions: for wheels up to 26" rim diameter, 20" width and 70 kg weight. The software offers the usual functions such as static and dynamic balancing, matching of rim and tire as well as the attachment of concealed weights behind the spokes.

In addition to regular measurement results, the WBE 45 series permits well-founded tire diagnostics to help diagnose further sources of faults at tires and rims.

  • Effortless lifting and positioning of the tire through an integrated tire lift
  • Simple operation and efficient technology
  • Different static and dynamic balancing options
  • Matching of rim and tire imbalance
  • Attachment of concealed weights behind the spokes
  • Timesaving automatic tire positioning
  • Multiple-user function of software
  • Electronic scanning arm for quick recording of the rim diameter and distance
  • Automatic opening and closing of the tire cover
  • Quiet motor
  • Easily readable TFT-monitor
  • Pneumatic wheel clamping

Comfortable work

Balancing with the WBE 4515 saves time and avoids measurement errors. The interactive menu navigation via the TFT monitor makes operation child's play. If necessary, you can even connect a printer (special accessories) to the wheel balancer and print out logs, which can be very practical, for example, during the customer discussion.

Equipment supply WBE 4515

Wheel balancer with TFT monitor, foot pedal brake, middle centering flange with pneumatic quick clamping, electronic feeler arm, wheel lift, laser measuring system, three centering cones, sample weight, tongs, gauge and holder pins for clamping equipment.

Special accessories Order number
Wheel lift (not for WBE 4510/WBE 4515) 1 695 900 004
Position laser and light ring (only for WBE 4230, WBE 4235, WBE 4430 and WBE 4435) 1 695 654 994
Set of quick clamp cones M10x1.25 1 695 612 100
Centering cone (dia. 88 - 132 mm) 1 695 653 449
Fourth centering cone (dia. 120 - 174 mm) 1 695 606 300
Spacer ring for rims with high wheel offset 1 695 606 200
Three-arm flange for light commercial vehicles 1 695 653 420
Passenger vehicle universal flange, infinitely variable adjustment, incl. centering rings 1 695 654 043
Calibration weight 1 695 654 376
Wire cleaning brush 0 986 625 053
Centering kit for GM/OPEL (without middle centering flange) 1 695 655 323
Centering kit for GM/OPEL Expert (without middle centering flange) 1 695 655 324
Centering kit for BMW (without middle centering flange) 1 695 655 325
Centering kit for Daimler/Smart (without middle centering flange) 1 695 655 326
Set of four centering cones 42 - 111.5 mm 1 695 655 293
Centering system DuoExpert (2 sleeves in carrying case 54-75 mm) 1 695 625 000
Set of variable model-specific clamping plates (QuickPlate) - (4-, 5- and 6-hole rims) 1 695 655 294
Variable model-specific clamping plates (QuickPlate) - (4-hole rims) 1 695 655 295
Variable model-specific clamping plates (QuickPlate) - (5-hole rims) 1 695 655 296
Variable model-specific clamping plates (QuickPlate) - (6-hole rims) 1 695 655 297
Wall chart for QuickPlate 1 695 655 298
FixPlate set (FixPlate No. 1 to 4, 10 centering pins, 25 bolt heads, 1 wall chart) 1 695 655 299
FixPlate No. 1 - 4x98/4x100/4x101.6/4x108/4x114.3/7x150/4x170 (without centering pin and bolt heads) 1 695 655 300
FixPlate No. 2 - 5x98/5x108/5x110/5x115/5x120.65/5x135/5x154.95 (without centering pin and bolt heads) 1 695 655 301
FixPlate No. 3 - 5x100/5x120/5x114.3/5x120/5x127/5x130/5x139.7/5x150/5x165.1 (without centering pin and bolt heads) 1 695 655 302
FixPlate No. 4 - 3x98/3x112/3x114.3/3x115/3x127/3x130/6x135/6x139.7/4x165.1 (without centering pin and bolt heads) 1 695 655 303
Centering pin for FixPlate without bolt heads 1 695 655 304
Wall chart for FixPlate 1 695 655 305
Bolt head/blunt cone/dia. 24.5 mm/length 28 mm/bolt length (incl. head) 80 mm 1 695 655 306
Bolt head/blunt cone/dia. 24.5 mm/length 38 mm/bolt length (incl. head) 90 mm 1 695 655 307
Bolt head/blunt cone/dia. 24.5 mm/length 48 mm/bolt length (incl. head) 100 mm 1 695 655 308
Bolt head/spherical collar/dia. 24.5 mm/length 38 mm/bolt length (incl. head) 90 mm 1 695 655 309
Bolt head/spherical collar/dia. 24.5 mm/length 48 mm/bolt length (incl. head) 100 mm 1 695 655 310
Bolt head/Range Rover/Land Rover/dia. 34 mm/length 28 mm/bolt length (incl. head) 80 mm 1 695 655 311
Bolt head/pointed cone/dia. 22.5 mm/length 48 mm/bolt length (incl. head) 100 mm 1 695 655 312
Bolt head/pointed cone/dia. 22.5 mm/length 58 mm 1 695 655 313
Bolt head/pointed cone/dia. 19 mm/length 55.6 mm 1 695 655 314
Set of model-specific clamping plates (No. 1 to 4), Expert set of five centering pin types, colored,
two wall charts and off-road spacer sleeve
1 695 635 100
Off-road set of model-specific clamping plates (2 pieces), colored, two centering pin sets, wall charts and off-road spacer sleeve 1 695 655 327
Model-specific clamping plate (TSP No. 1), colored, without centering pin -
4x95.25/4x98/4x100/4x101.6/4x108/4x114.3/7x150/4x170
1 695 654 628
Model-specific clamping plate (TSP No. 2), colored, without centering pin -
5x98/5x108/5x110/5x115/5x120.65/5x135/5x154.95
1 695 654 629
Model-specific clamping plate (TSP No. 3), colored, without centering pin -
5x100/5x112/5x114.3/5x120/5x127/5x130/5x139.7/5x150/5x165.1
1 695 654 630
Model-specific clamping plate (TSP No. 4), colored, without centering pin -
3x98/3x112/3x114.3/3x115/3x127/3x130/6x135/6x139.7/4x165.1
1 695 655 315
Centering pin "I" 100 mm long, dia. 19 mm 1 696 654 864
Centering pin "II" 80 mm long, blunt cone, dia. 24.5 mm 1 695 654 626
Centering pin "III" 90 mm long, spherical collar, dia. 24.5 mm 1 695 654 862
Centering pin "IV" 80 mm long, Range Rover/Land Rover, dia. 34 mm 1 695 654 860
Centering pin "V" 100 mm long, blunt cone, dia. 22.5 mm 1 695 654 921
Spacer ring with magnets (40 mm) 1 695 655 316
Spacer sleeve for off-road (40 mm) 1 695 654 895
Motorcycle flange (standard) 1 695 654 039
Clamp kit for single suspension arm with shaft (dia. 19 mm) 1 695 654 060
Quick clamping unit Quick-Fix for 14 mm shaft 1 695 654 117
Quick clamping unit Quick-Fix for 19 mm shaft 1 695 655 321
Centering sleeve BMW C-R-K-models for 14 mm shaft 1 695 654 931
Centering set for Ducati, Triumph (19 mm axle) 1 695 653 538
Printer set with mount (only for WBE 4510/WBE 4515) 1 695 654 956
Center shaft (dia. 10 mm) incl. nuts and two spacer sleeves for mopeds.
Special accessories for motorcycles (standard). Length 177 mm
1 695 653 430
Center shaft (dia. 14 mm) incl. nuts and two spacer sleeves for mopeds.
Special accessories for motorcycles (standard). Length 233 mm
1 695 604 700